Basic Info.
Product Description
Product Description
Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,Communications, instrumentation, vehicles, plastic products, metal, food, chemical,building materials, medical, aerospaceand other products.
| Model | MC-HW80 | MC-HW150 | MC-HW225 | MC-HW408 | MC-HW800 | MC-HW1000 |
| Internal dimensions W×H×D(cm) | 40×50×40 | 50×60×50 | 60×75×60 | 80×85×60 | 100×100×80 | 100*100*100 |
| External size W×H×D(cm) | 88×137×100 | 109×152×113 | 109×168×113 | 129×177×123 | 150×191×144 | 150*193*163 |
| temperature range | -60ºC~150ºC -40~150ºC -20~150ºC | |||||
| Humidity range | 20%-98%R.H(10%-98%R.H/5%-98%R.H Special conditions) | |||||
| Temperature and humidity analysis accuracy distribution accuracy | ±0.1ºC;±0.1%R.H./±2.0ºC;±3.0%R.H. | |||||
| Temperature and humidity control accuracy / volatility | ±0.3ºC;±2.5%R.H./±0.5ºC;±2.0%R.H | |||||
| Heating/cooling time | About 4.0 ° C / min; about 1.0 ° C / min (5-10 ° C per minute is a special selection) | |||||
| Internal and external materials | SUS304#1.5mm Stainless steel plate matte finish, outer box with advanced cold plate nano-paint | |||||
| Insulation material | High temperature resistant high density ethyl chloroformate foam insulation material | |||||
| cooling system | Air-cooled / single-stage compressor (-20 ° C); wind, water-cooled / two-stage compressor (-40 ° C - 70 ° C) | |||||
| protective device | No fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch Ultra-humidity over-temperature protection switch, fuse, fault warning system | |||||
| power supply | 1Φ220VAC±10%50/60Hz&3Φ,380V/415VAC±10%50/60Hz | |||||
*High-texture appearance, the body adopted an arc shape, surface matte stripes processing, and flat-handle, easy to operate, safe and reliable.
*Rectangular multi-layer glass View window, the use of guinea pigs observed in the test window witt anti-sweat heaters device prevents water gas condensate ,Knot, water droplets, PL fluorescent lamps to keep the inside lighting.
*Door bunk isolated airtight packing, can be effectively isolated from the internal temperature of the leak
*With external water supply system, convenient to supplement the cylinder water supply, and automatic recovery using.
*Compressor cycling system used France"Tecumseh"brand which can effectively remove condenser pipe and between capillary Lubricating oil and whole series adopt environmental protection refrigerant
*Controller uses the imported LED display screen, can display measured values and setting time
*Controller with multisegment program editor and temperature and humidity can be fast (OUICK) or slope (SLOP) controlled.